TP-Link 450Mbps Wireless N Access Point

Available: In Stock
$65.00

The TP-LINK Wireless N Access Point TL-WA901N is designed to establish or expand a scalable high-speed wireless N network or to connect an Ethernet-enabled device such as a game console, digital media adapter, printer, or network-attached storage device to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or any other application that you may wish to use.

FEATURES

  • 450Mbps wireless transmission rate brings smooth wireless N experience
  • Supports multiple operating modes: Access Point, Range Extender, Multi-SSID and Client modes
  • Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
  • Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector

Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes – Easy to Build WLAN
Supports Client, Multi-SSID, Range Extender, and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported – More Flexible Deployment
The TL-WA901N is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

SPECIFICATIONS

  • HARDWARE FEATURES:
    • Interface:
      • 1× 10/100M Ethernet Port(RJ45)
      • Support Passive PoE
    • Button: Power On/Off Button, Reset Button, WPS Button
    • External Power Supply: 9VDC / 0.85A
    • Wireless Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
    • Dimensions ( W x D x H ): 7.7 × 5.3 × 1.4 in (195 × 134 × 36 mm )
    • Antenna Type: 3 Fixed Omni-Directional Antennas
  • WIRELESS FEATURES:
    • Frequency: 2.4 GHz
    • Signal Rate: 450 Mbps at 2.4 GHz
    • Reception Sensitivity:
      • 11g 54M: –76dBm
      • 11n 20Mbps: –73dBm
      • 11n 40Mbps: –70dBm
    • Transmit Power:
      • CE: <20dBm
      • FCC: <30dBm
    • Wireless Modes: Access Point, Range Extender, Client, Multi-SSID
    • Wireless Functions: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics
    • Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA-PSK2 encryptions
    • DHCP: Server, DHCP Client List
    • Quality of Service: WMM
    • Management: SNMP
    • Advanced Functions: Up to 30 meters PoE is supported
  • OTHERS:
    • Certification: CE, FCC, RoHS
    • Package Contents:
      • Wireless N Access Point TL-WA901N
      • Power Adapter
      • Passive PoE Power Injector
      • RJ45 Ethernet Cable
      • Quick Installation Guide
    • System Requirements:
      • Microsoft Windows 98SE/NT/2000/­XP/Vista™/7/8/8­.1/10, MAC OS, NetWare, UNIX or Linux
      • Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser
      • Cable or DSL Modem
      • Subscription with an Internet Service Provider (for Internet access)
    • Environment:
      • Operating Temperature: 0°C~40°C (32°F~104°F)
      • Storage Temperature: –40°C~70°C (-40°F~158°F)
      • Operating Humidity: 10%~90% non-condensing
      • Storage Humidity: 5%~90% non-condensing
    • Protocol Support: IPv4, IPv6

The TP-LINK Wireless N Access Point TL-WA901N is designed to establish or expand a scalable high-speed wireless N network or to connect an Ethernet-enabled device such as a game console, digital media adapter, printer, or network-attached storage device to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or any other application that you may wish to use.

FEATURES

  • 450Mbps wireless transmission rate brings smooth wireless N experience
  • Supports multiple operating modes: Access Point, Range Extender, Multi-SSID and Client modes
  • Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
  • Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector

Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes – Easy to Build WLAN
Supports Client, Multi-SSID, Range Extender, and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported – More Flexible Deployment
The TL-WA901N is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

SPECIFICATIONS

  • HARDWARE FEATURES:
    • Interface:
      • 1× 10/100M Ethernet Port(RJ45)
      • Support Passive PoE
    • Button: Power On/Off Button, Reset Button, WPS Button
    • External Power Supply: 9VDC / 0.85A
    • Wireless Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
    • Dimensions ( W x D x H ): 7.7 × 5.3 × 1.4 in (195 × 134 × 36 mm )
    • Antenna Type: 3 Fixed Omni-Directional Antennas
  • WIRELESS FEATURES:
    • Frequency: 2.4 GHz
    • Signal Rate: 450 Mbps at 2.4 GHz
    • Reception Sensitivity:
      • 11g 54M: –76dBm
      • 11n 20Mbps: –73dBm
      • 11n 40Mbps: –70dBm
    • Transmit Power:
      • CE: <20dBm
      • FCC: <30dBm
    • Wireless Modes: Access Point, Range Extender, Client, Multi-SSID
    • Wireless Functions: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics
    • Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA-PSK2 encryptions
    • DHCP: Server, DHCP Client List
    • Quality of Service: WMM
    • Management: SNMP
    • Advanced Functions: Up to 30 meters PoE is supported
  • OTHERS:
    • Certification: CE, FCC, RoHS
    • Package Contents:
      • Wireless N Access Point TL-WA901N
      • Power Adapter
      • Passive PoE Power Injector
      • RJ45 Ethernet Cable
      • Quick Installation Guide
    • System Requirements:
      • Microsoft Windows 98SE/NT/2000/­XP/Vista™/7/8/8­.1/10, MAC OS, NetWare, UNIX or Linux
      • Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser
      • Cable or DSL Modem
      • Subscription with an Internet Service Provider (for Internet access)
    • Environment:
      • Operating Temperature: 0°C~40°C (32°F~104°F)
      • Storage Temperature: –40°C~70°C (-40°F~158°F)
      • Operating Humidity: 10%~90% non-condensing
      • Storage Humidity: 5%~90% non-condensing
    • Protocol Support: IPv4, IPv6

Delivery Rates

Australia Delivery - We charge a flat rate of $5.90 AUD per shipment. Orders are shipped by air via Australia Post straight to your door! 

Delivery Times 

Orders ship from our fulfillment partner Mighty Ape. Their warehouse is based in New Zealand with daily flights across the Tasman with Australia Post.

As a result of courier delays in Australia due to Covid-19, the current standard delivery times for In Stock products using Australia Post are as follows:

  • QLD 3-5 business days
  • NSW 3-6 business days
  • ACT 4-6 business days
  • VIC 5-9 business days
  • SA 6-9 business days
  • TAS, WA 7-9 business days
  • NT 7-10 business days

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      • Fast Shipping
        $5.90 Flat Rate
      • Customer Support
        AU/NZ Team
      • Easy Returns
        14 Day Returns
      • Secure Payment
        Transaction Protection
      • Largest Range
        Best Brands & Games

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)