StarTech IDE to SATA Drive Adapter

Available: Out of Stock
$52.00

CONNECT YOUR SATA HARD DRIVE OR BLU-RAY/DVD/CD-ROM DRIVE TO AN IDE MOTHERBOARD

The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port – a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard.

FEATURES

  • Connect a SATA device to an IDE/ATA motherboard or controller card
  • Complete hardware solution; no software required
  • Support for 48-bit Logical Block Addressing (LBA)
  • Compliant with SATA revision 1.0 specification
  • Supports SATA 1/11/111 (1.5/3/6Gbps) drives
  • Compatible with ultra ATA 133 specification
  • Supports 2.5', 3.5", and 5.25" SATA Drives
  • ODD (optical Disk Drive) support, including Blu-ray, DVD,and CD-ROM drives
  • An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface
  • Ideal for use with older motherboards that do not support SATA
  • Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection
  • Hassle-free installation, with no software CD required
  • Backed by a StarTech.com 2 year warranty and free lifetime technical support

The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.

The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.

SPECIFICATIONS

  • Warranty Information:
    • Warranty: 2 Years
  • Hardware:
    • Chipset ID: Marvell – 88SA8052
    • Compatible Drive Types: SATA
    • Drive Size: 2.5in & 3.5in
    • Interface: IDE
    • Number of Drives: 1
  • Performance:
    • Maximum Data Transfer Rate: 133MB/sec
    • RAID: No
  • Connector(s):
    • Connector Type(s):
      • 1 – IDE (40 Pin, EIDE/PATA)
      • 1 – SATA Data & Power Combo (7+15 pin)
      • 1 – SP4 (4 pin, Small Drive Power)
  • Software:
    • OS Compatibility: OS independent; No software or drivers required
  • Special Notes / Requirements:
    • System and Cable Requirements: An IDE controller and ATA cable (not included).
  • Environmental:
    • Humidity: 15~90% RH
    • Operating Temperature: 5°C to 50°C (40°F to 122°F)
    • Storage Temperature: –25°C to 80°C (-13°F to 176°F)
  • Physical Characteristics:
    • Material: Steel and Plastic
    • Product Height: 0.9 in [2.3 cm]
    • Product Length: 3 in [75.5 mm]
    • Product Width: 0.8 in [20 mm]
    • Weight of Product: 1 oz [29 g]
  • Packaging Information:
    • Package Height: 1.3 in [33 mm]
    • Package Length: 5.7 in [14.5 cm]
    • Package Width: 6.9 in [17.5 cm]
    • Shipping (Package) Weight: 3.1 oz [89 g]
  • What's in the Box:
    • Included in Package:
      • 1 – IDE to SATA adapter
      • 1 – LP4 Molex to SP4 Power Cable
      • 1 – Instruction Manual

CONNECT YOUR SATA HARD DRIVE OR BLU-RAY/DVD/CD-ROM DRIVE TO AN IDE MOTHERBOARD

The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port – a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard.

FEATURES

  • Connect a SATA device to an IDE/ATA motherboard or controller card
  • Complete hardware solution; no software required
  • Support for 48-bit Logical Block Addressing (LBA)
  • Compliant with SATA revision 1.0 specification
  • Supports SATA 1/11/111 (1.5/3/6Gbps) drives
  • Compatible with ultra ATA 133 specification
  • Supports 2.5', 3.5", and 5.25" SATA Drives
  • ODD (optical Disk Drive) support, including Blu-ray, DVD,and CD-ROM drives
  • An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface
  • Ideal for use with older motherboards that do not support SATA
  • Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection
  • Hassle-free installation, with no software CD required
  • Backed by a StarTech.com 2 year warranty and free lifetime technical support

The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.

The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.

SPECIFICATIONS

  • Warranty Information:
    • Warranty: 2 Years
  • Hardware:
    • Chipset ID: Marvell – 88SA8052
    • Compatible Drive Types: SATA
    • Drive Size: 2.5in & 3.5in
    • Interface: IDE
    • Number of Drives: 1
  • Performance:
    • Maximum Data Transfer Rate: 133MB/sec
    • RAID: No
  • Connector(s):
    • Connector Type(s):
      • 1 – IDE (40 Pin, EIDE/PATA)
      • 1 – SATA Data & Power Combo (7+15 pin)
      • 1 – SP4 (4 pin, Small Drive Power)
  • Software:
    • OS Compatibility: OS independent; No software or drivers required
  • Special Notes / Requirements:
    • System and Cable Requirements: An IDE controller and ATA cable (not included).
  • Environmental:
    • Humidity: 15~90% RH
    • Operating Temperature: 5°C to 50°C (40°F to 122°F)
    • Storage Temperature: –25°C to 80°C (-13°F to 176°F)
  • Physical Characteristics:
    • Material: Steel and Plastic
    • Product Height: 0.9 in [2.3 cm]
    • Product Length: 3 in [75.5 mm]
    • Product Width: 0.8 in [20 mm]
    • Weight of Product: 1 oz [29 g]
  • Packaging Information:
    • Package Height: 1.3 in [33 mm]
    • Package Length: 5.7 in [14.5 cm]
    • Package Width: 6.9 in [17.5 cm]
    • Shipping (Package) Weight: 3.1 oz [89 g]
  • What's in the Box:
    • Included in Package:
      • 1 – IDE to SATA adapter
      • 1 – LP4 Molex to SP4 Power Cable
      • 1 – Instruction Manual

Delivery Rates

Australia Delivery - We charge a flat rate of $5.90 AUD per shipment. Orders are shipped by air via Australia Post straight to your door! 

Delivery Times 

Orders ship from our fulfillment partner Mighty Ape. Their warehouse is based in New Zealand with daily flights across the Tasman with Australia Post.

As a result of courier delays in Australia due to Covid-19, the current standard delivery times for In Stock products using Australia Post are as follows:

  • QLD 3-5 business days
  • NSW 3-6 business days
  • ACT 4-6 business days
  • VIC 5-9 business days
  • SA 6-9 business days
  • TAS, WA 7-9 business days
  • NT 7-10 business days

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      • Fast Shipping
        $5.90 Flat Rate
      • Customer Support
        AU/NZ Team
      • Easy Returns
        14 Day Returns
      • Secure Payment
        Transaction Protection
      • Largest Range
        Best Brands & Games

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)