8GB Kingston 2666Mhz DDR4 Non-ECC CL19 Dimm

Available: Out of Stock
$102.00

This document describes ValueRAM's KVR26N­19S8/8 is a 1G x 64-bit (8GB) DDR4–2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA
omponents. The SPD is programmed to JEDEC standard latency DDR4–2666 timing of 19–19–19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES:

  • Power Supply: VDD=1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP – 2.5V Typical
  • VDDSPD=2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.23” (31.25mm)
  • RoHS Compliant and Halogen-Free

This document describes ValueRAM's KVR26N­19S8/8 is a 1G x 64-bit (8GB) DDR4–2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA
omponents. The SPD is programmed to JEDEC standard latency DDR4–2666 timing of 19–19–19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES:

  • Power Supply: VDD=1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP – 2.5V Typical
  • VDDSPD=2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.23” (31.25mm)
  • RoHS Compliant and Halogen-Free

Delivery Rates

Australia Delivery - We charge a flat rate of $5.90 AUD per shipment. Orders are shipped by air via Australia Post straight to your door! 

Delivery Times 

Orders ship from our fulfillment partner Mighty Ape. Their warehouse is based in New Zealand with daily flights across the Tasman with Australia Post.

As a result of courier delays in Australia due to Covid-19, the current standard delivery times for In Stock products using Australia Post are as follows:

  • QLD 3-5 business days
  • NSW 3-6 business days
  • ACT 4-6 business days
  • VIC 5-9 business days
  • SA 6-9 business days
  • TAS, WA 7-9 business days
  • NT 7-10 business days

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      • Fast Shipping
        $5.90 Flat Rate
      • Customer Support
        AU/NZ Team
      • Easy Returns
        14 Day Returns
      • Secure Payment
        Transaction Protection
      • Largest Range
        Best Brands & Games

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)