StarTech IDE to SATA Drive Adapter

CONNECT YOUR SATA HARD DRIVE OR BLU-RAY/DVD/CD-ROM DRIVE TO ANIDE MOTHERBOARD

The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATAI/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port – acost effective solution that allows you to add newer SATA drives, and keep yourexisting motherboard.

FEATURES

• Connect a SATA device to an IDE/ATA motherboard or controller card
• Complete hardware solution; no software required
• Support for 48-bit Logical Block Addressing (LBA)
• Compliant with SATA revision 1.0 specification
• Supports SATA 1/11/111 (1.5/3/6Gbps) drives
• Compatible with ultra ATA 133 specification
• Supports 2.5', 3.5", and 5.25" SATA Drives
• ODD (optical Disk Drive) support, including Blu-ray, DVD,andCD-ROM drives
• An internal solution for connecting your SATA hard drive to a motherboardsupporting an IDE interface
• Ideal for use with older motherboards that do not support SATA
• Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive)support, from an IDE host connection
• Hassle-free installation, with no software CD required
• Backed by a StarTech.com 2 year warranty and free lifetime technicalsupport

The IDE/SATA adapter offers a cost-effective solution for bridging the gapbetween a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. TheIDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a addBlu-ray, DVD, or CD-ROM drives to an older IDE motherboard.

The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and freelifetime technical support.

SPECIFICATIONS

• Warranty Information:
  • Warranty: 2 Years
• Hardware:
  • Chipset ID: Marvell – 88SA8052
  • Compatible Drive Types: SATA
  • Drive Size: 2.5in & 3.5in
  • Interface: IDE
  • Number of Drives: 1
• Performance:
  • Maximum Data Transfer Rate: 133MB/sec
  • RAID: No
• Connector(s):
  • Connector Type(s):
    • 1 – IDE (40 Pin, EIDE/PATA)
    • 1 – SATA Data & Power Combo (7+15 pin)
    • 1 – SP4 (4 pin, Small Drive Power)
• Software:
  • OS Compatibility: OS independent; No software or driversrequired
• Special Notes / Requirements:
  • System and Cable Requirements: An IDE controller and ATAcable (not included).
• Environmental:
  • Humidity: 15~90% RH
  • Operating Temperature: 5°C to 50°C (40°Fto 122°F)
  • Storage Temperature: –25°C to 80°C (-13°Fto 176°F)
• Physical Characteristics:
  • Material: Steel and Plastic
  • Product Height: 0.9 in [2.3 cm]
  • Product Length: 3 in [75.5 mm]
  • Product Width: 0.8 in [20 mm]
  • Weight of Product: 1 oz [29 g]
• Packaging Information:
  • Package Height: 1.3 in [33 mm]
  • Package Length: 5.7 in [14.5 cm]
  • Package Width: 6.9 in [17.5 cm]
  • Shipping (Package) Weight: 3.1 oz [89 g]
• What's in the Box:
  • Included in Package:
    • 1 – IDE to SATA adapter
    • 1 – LP4 Molex to SP4 Power Cable
    • 1 – Instruction Manual

Delivery Rates

Australia Delivery - Our delivery rates vary based on the weight and volume of your total order. An accurate shipping cost will be calculated during the checkout process. Orders are shipped by air via Australia Post straight to your door! 

Delivery Times 

Orders ship from our fulfillment partner Mighty Ape. Their warehouse is based in New Zealand with daily flights across the Tasman with Australia Post.

As a result of courier delays in Australia due to Covid-19, the current standard delivery times for In Stock products using Australia Post are as follows:

• QLD 3-5 business days
• NSW 3-6 business days
• ACT 4-6 business days
• VIC 5-9 business days
• SA 6-9 business days
• TAS, WA 7-9 business days
• NT 7-10 business days