HyperX Procast Microphone
- Product SKU: 35940443
- Category: All products, Best Sellers, Boost All, HyperX, Top Sellers In Stock
The HyperX ProCast is a professional-grade condenser microphone with an XLRconnection* built to capture more details in your recordings with its largediaphragm condenser capsule. Featuring an included anti-shock mount and snap-onHyperX Shield pop filter to reduce rumbles and pops. Its switchable 80Hzhigh-pass filter and cardioid polar pattern reduce unwantedbackground noise.
The stylish ProCast is compatible with most arms and stands, an easy way totake your streaming or recording setup to the next level.
*Interface, preamp, XLR cable, and boom arm/mic stand are not included.
Features:
- Gold-sputtered large diaphragm condenser
- Cardioid polar pattern
- XLR Connection
- Detachable HyperX Shield metal pop filter
- Built-in anti-vibration shock mount
- Switchable 80Hz high-pass filter and –10dB PAD
- Boom arm and mic stand threading
- Unique aesthetic design
Specifications:
- Element – Gold-sputtered externally-polarized condenser
- Diameter of diaphragm – 1”
- Polar pattern(s) – Cardioid
- Frequency response – 20Hz~20kHz
- Sensitivity – –38± 3dBV (1V/Pa at1kHz)
- Maximum input sound level – 140dBSPL (THD 1%@1kHz)
- Noise (RMS) – –118dBV (A-weighting)
- Dynamic range – 123dB
- Signal-to-noise ratio – 75dB
- Output Impedance – 16 Ω
- Phantom power requirements – 48V DC, 3mA typical
Connections and Features:
- Shock mount – Built-in
- Pop Filter – Metal, snap-on
- Connection type – Balanced 3-pin XLR male
Controls:
- Passive attenuation device (PAD) – –10dB
- High-pass filter – –3dB@80Hz, –12dB/Octave
Physical Specifications:
- Weight (Microphone) – 376g
- Weight (Shock mount and pop filter) – 127g
- Total Weight – 503g
- Dimensions – 134L102W209H (mm)
Please Note:
Due to hygiene reasons, we are unable to accept change of mind returnsfor this product if it has been opened so please choose carefully. Should theproduct be faulty, please do not hesitate to contact our customer service teamfor assistance.
The HyperX ProCast is a professional-grade condenser microphone with an XLRconnection* built to capture more details in your recordings with its largediaphragm condenser capsule. Featuring an included anti-shock mount and snap-onHyperX Shield pop filter to reduce rumbles and pops. Its switchable 80Hzhigh-pass filter and cardioid polar pattern reduce unwantedbackground noise.
The stylish ProCast is compatible with most arms and stands, an easy way totake your streaming or recording setup to the next level.
*Interface, preamp, XLR cable, and boom arm/mic stand are not included.
Features:
- Gold-sputtered large diaphragm condenser
- Cardioid polar pattern
- XLR Connection
- Detachable HyperX Shield metal pop filter
- Built-in anti-vibration shock mount
- Switchable 80Hz high-pass filter and –10dB PAD
- Boom arm and mic stand threading
- Unique aesthetic design
Specifications:
- Element – Gold-sputtered externally-polarized condenser
- Diameter of diaphragm – 1”
- Polar pattern(s) – Cardioid
- Frequency response – 20Hz~20kHz
- Sensitivity – –38± 3dBV (1V/Pa at1kHz)
- Maximum input sound level – 140dBSPL (THD 1%@1kHz)
- Noise (RMS) – –118dBV (A-weighting)
- Dynamic range – 123dB
- Signal-to-noise ratio – 75dB
- Output Impedance – 16 Ω
- Phantom power requirements – 48V DC, 3mA typical
Connections and Features:
- Shock mount – Built-in
- Pop Filter – Metal, snap-on
- Connection type – Balanced 3-pin XLR male
Controls:
- Passive attenuation device (PAD) – –10dB
- High-pass filter – –3dB@80Hz, –12dB/Octave
Physical Specifications:
- Weight (Microphone) – 376g
- Weight (Shock mount and pop filter) – 127g
- Total Weight – 503g
- Dimensions – 134L102W209H (mm)
Please Note:
Due to hygiene reasons, we are unable to accept change of mind returnsfor this product if it has been opened so please choose carefully. Should theproduct be faulty, please do not hesitate to contact our customer service teamfor assistance.
Delivery Rates
Australia Delivery - Our delivery rates vary based on the weight and volume of your total order. An accurate shipping cost will be calculated during the checkout process. Orders are shipped by air via Australia Post straight to your door!
Delivery Times
Orders ship from our fulfillment partner Mighty Ape. Their warehouse is based in New Zealand with daily flights across the Tasman with Australia Post.
As a result of courier delays in Australia due to Covid-19, the current standard delivery times for In Stock products using Australia Post are as follows:
- QLD 3-5 business days
- NSW 3-6 business days
- ACT 4-6 business days
- VIC 5-9 business days
- SA 6-9 business days
- TAS, WA 7-9 business days
- NT 7-10 business days